Designing a Projectile Launcher

Designing a Projectile LauncherINTRODUCTIONProjectile motion occurs when an intent or particle is dropped or is shoot at some sign swiftness, where it moves along a curved path under the influence of gloom (Splung,2015). It is known that without air resistance the maximum set up is achieved at a launch cant over of 45 and is illustrated below in figure 1, the constitution ordain determine whether or not this remains true in real life. .This report exit include a design and edifice of a garden rocket launcher and will investigate the family family relationship mingled with the range and tap of a dynamical. The launcher will apply mechanized means to launch the missile, it will also be able to re adapt so that the firing technique is identical forevery time and will be safe for the street girl.AIM To design and construct a missile launcher that will be used to investigate the relationship between the range of a garden rocket and its launch fee.HYPOTHESIS That the garden rocket will achieve a maximum range with a launch angle of 40 including the plane force of air resistance.INDEPENDENT VARIABLES The independent variables is the angle of release, measured in degrees.DEPENDENT VARIABLES The dependent variable is the range at which the projectile will land.CONTROLLED VARIBALES The controlled variables argon the handball projectile and the summit meeting of release. APPARTUS AND MATERIALSProjectile launcherHandball projectileSand pitTape measureProtractorDesign and construction of the projectile LauncherPROCEDUREHave projectile launcher on a table unity metre above the ground and angle the projectile at 0 with a protractor.Load the handball projectile into the launcher and set the projectile in position so that it can be fired by the triggering release.Have the sandpile set up at the standoffishness the projectile will land.Fire the projectile such that it lands in the sandpit and measure with tape measure and record resultsRepeat ste ps 1-4, 5 times with the constant height but varying the commencement angle each timeSAFETY HAZARDS HazardsPrecautions/ActionsRisk of projectile hitting mortalAs the projectile is continuously being fired from the launcher it is in-chief(postnominal) for this experiment to be carried out away from other groups. Group members will need to stand away and watch from a safe distance. as well as for the operator, in order to shoot the projectile without being misemployd they should use the projectile as intended and pull the trigger down guardedly ahead letting go.Personal attire should be appropriate for laboratory workAny hanging or loose jewellery should be removed before conducting experiment to derogate chances of getting caught by either parts of the launcher as it can be easy to be caught by the steel pole if operator is not careful.Teacher is to be notified if it gets caught and to safely remove and look for any injuries because of the jewellery.Equipment should be firm ly unneuroticSo that the equipment does not breakdown mid trial and potentially injure someone, the equipment should be put firmly in place with everything intact before conducting any trial.RESULTS Table 1 Table of resultsStarting angle ()landing place range of projectile trial 1 (m)Landing range of projectile trial 2 (m)Average range (m)02.262.302.28202.462.40 2.43403.06 3.01 3.04 452.452.942.70502.752.742.75Figure 3 Relationship between starting angle and average landing rangeUsing the slope linguistic ruleIt is clear from table 1 that for this particular experiment the best angle to achieve maximumIt is clear in figure 3 that ashad change magnitude the resistance had also increased, this means that there is an directly proportional relationship between resistance and, indicating that the thicker the wire means less resistance as d2 will be inversely proportional to resistance, which is out-of-pocket to less collisions with thicker wires.Results shown in figure 3 shows little scatter around the trend line. This indicates a high level of clearcutness in the results, indicating that there were minimal stochastic wrongful conducts.Possible sources of random wrongful conduct that may pass water reduce the precision of the result is slight misreading values in the protractor and this could deal happened due to parallax error. The correct lining of sight needs to be used to repeal parallax error, the exact point is only measured if the mark of the protractor is exactly check to the eyes and is difficult to achieve with the human eye, and ultimately cannot be avoided. except According to the graph in figure 3, it is seen that there are no outliers from the trend line, which suggests that this did not happen. If this fault was from parallax error, a way to minimise this error is to have an instrument designed to eliminate this effect by placing a mirrored surface behind the launch angle so the operator can align eyesight with the scale with ease.Anoth er random error is possibly setting up the equipment incorrectly, as having Possible sources of systematic error that may have reduced the accuracy of the results may possibly have been a problem with the projectile launcher, not having uniformity in the velocity at each launch which will affect the range of the projectile, to minimise this error is to have some sort of velocity measurer to keep consistency in the projectile launcher.the process of levelling eye level and where the values are located in the protractor.CONCLUSIONThe aim of this experiment was to design and construct a projectile launcher that will be used to investigate the relationship between the range of a projectile and its launch angle. This was attained by varying the angle of the constructed launcher and firing it at the same height with the same tension every time. It was clear from this experiment that there is a relationship between the angle of release of an object and the landing range and that they had a parabolic relationship. The hypothesis that the projectile will achieve a maximum range with a launch angle of 40 including the horizontal force of air resistance, was supported as it is seen in table 1 that the maximum range is achieved when launched at an angle of 40.Sources usedWilliam Shakespeare was born in this house and grew up here with his parents and siblings. He also spent the get-go five years of his marriage living here with his wife Anne Hathaway. lavatory and Mary Shakespeare were wealthy enough to own the largest house on Henley Street. trick Shakespeare spiritedd and worked in this house for fifty years. When he married Mary Arden she came to live with him and they had a total of eight children, William was the third to be born. In 1568 magic trick became the Mayor of Stratford, which was the highest elective office in the town. On Sunday, dressed in his fine red robes, he would have been escorted to Holy Trinity perform to attend mass. It was because of his fathers status as Mayor that William was privileged enough to have attended the local grammar school to begin his education.John Shakespeare died in 1601 and as the eldest surviving child, William inherited the house. He leased part of the retention and it became an inn called the Maidenhead (and later the Swan and Maidenhead). The inn remained until 1847. When Shakespeare died he left(p) the house to his eldest daughter Susanna, and when she died she left it to her only child, Elizabeth.Although she married doubly Elizabeth had no children, so when she died the house fell to a descendant of Joan Hart, one of Shakespeares sisters. The house was owned by the Hart family until the late 18th century, until it went up for sale and was purchased by the Shakespeare Birthplace Trust in 1847. We have cared for it ever since.For the official guidebook of the Shakespeare Birthplace Trust visit our online shop.